Tag: iphone

Saving Your Wet Smartphone

Many of us have had the dreaded feeling of having our Smartphone immersed in water or at least know some who have been faced with this predicament. For most individuals, it is usually the bathtub, kitchen sink, toilet or even the swimming pool which is usually the culprit. However, people living in the hurricane flood zones of Texas, Louisiana, Florida, Puerto Rico and the islands of the Caribbean, have a really high probability of getting their Smartphone immersed in water each hurricane season. We have also heard many stories about how to save your phone or at least your data when the phone gets accidentally wet. Among the prominent ones – dropping the phone in a “magic” portion of rice will remove the water and save your phone. The conventional thinking here is that rice can suck the moisture from the phone and immediately return it to its “prior life”. Is this really true? And, if it not, what is the best way to preserve a Smartphone that has been immersed in water? One thing is certain today is the fact that with the price of some new Smartphone approaching $1,000, the initial “fix” cannot be a shot in the dark.

Smart Phone

When the cover is removed from any Smartphone, you are immediately looking at a battery and hundreds of micro-electronic connections. Conventional wisdom teaches us that water and electronics make a very bad companion. We should also note that construction of Smartphone varies according to the manufacturer. Therefore two phones that are fully immersed in the same amount of water for the same time do not necessarily absorb the same amount of water. Various phone technology experts have different ideas regarding what to do when a Smartphone gets wet. However, one advice is usually common among them – the quicker the phone is dried inside out after getting immersed in water, the better the chance of preserving the phone or at least the data. There are also some common “do not”. Among them:
-Do not attempt to charge the phone. Plugging a wet phone into an electrical circuit is outright dangerous and it will cause electricity to flow into a wet circuit board resulting in the board being “fried”.
– If the phone was off when it fell in water, do not turn it on. Turning on the device could cause electricity to flow which can destroy a water-logged circuit board.
In some cases, by simply removing the cover and the battery and let the phone sit on a desktop for a while you can dry the water from the electronics. A search of the web will show multiple stories of how to immerse the phone into a bag of uncooked rice and that should do the trick. The concept is based on a theory that the starch in rice will draw out the water. However, several studies – including one by TekDry (www.tekrdy.com), a Denver, Colorado-based company found that rice removed only an average of 13% of the water from a water-logged phone after 48 hours. In addition, rice can multiply the challenge posed by water by introducing dust into the wet phone electronics – a combination that is almost certain to kill the phone.
The folks at DryBox (dryboxrescue.com), a San Antonio-based firm that provides assistance in the recovery of mini electronics, suggest that vacuum drying is your best option. The vacuum is set at pressure and temperature slightly below boiling. This enables the water inside the electronics to boil off slowly without damaging the components. It should be noted that the sooner the phone is dried out after getting wet, the better the chance of complete recovery. Another important consideration is the type of water in which the Smartphone was immersed. Your kitchen sink, toilet bowl or bathtub is really bad. However, if the culprit is salt water- as in the ocean, this corrosive nature of salt water will almost instantly destroy the electronics. In such a case, the experts at DryBox recommend that you immediately place the phone in a Zip-lock bag with some bottled, purified water and just a pinch of baking soda. The baking soda will counteract the corrosiveness of the salt water until you can get it cleaned out professionally.
Two final points – one should always remember that construction of Smartphone varies with manufacturer. As a result, the resiliency of the phones may be different when immersed in water. As an example, Android phones with their removable battery have a much higher survival rate than more expensive iPhone. This is because Android phones allow for vacuum or another drying device easier and quicker access to the phone electronics. The second point – it is good practice to always back up important data and contact list in some form of free or low cost-cloud service for both iPhone and Android.

Is It Time to get rid of your Limited Cell Phone Data Plan?

These days it has become extremely difficult to find a Cell Phone company that is not offering an unlimited data plan. Each plan is loaded with all kinds of caveats. For example, Verizon guarantees full-speed 4G LTE for the first 22GB of data each billing period. T-Mobile offers free text and data to its customers who travel in certain international countries. With all this happening around us, why then would anyone still have a limited data plan?
If you are thinking about looking into an unlimited plan, here are two links that can get you started:
https://gizmodo.com/which-unlimited-data-plan-is-the-best-1792476535
https://www.whistleout.com/CellPhones/Guides/The-Best-Unlimited-Data-Plans-Around
If you happen to be one of what I call “Legacy” customers who still has limited data plan, the folks at CNET.com have come up with seven ideas that can help some (especially) IPhone users reduce their data usage.
First, recognize the data consuming apps on your phone and restrict use when not needed.
1. Restrict iTunes and App Store downloads
You can prevent iTunes and the App Store from downloading music, movies, apps, and so on when you are away from a Wi-Fi signal. To do so, go to Settings > iTunes & App Store and toggle off Use Cellular Data. Tap this to prevent iTunes from using your cellular data for automatic downloads.
2. Disable background app refresh. IOS apps can update in the background, grabbing new content as they sit idle so they can show you the latest news when you return to them. Go to Settings > General > Background App Refresh in order to turn this setting off completely. You can also go the a la carte route from the list and choose which apps update in the background. Pick and choose the apps that may use data in the background of your phone, or turn them all off.
3. Find out which apps are using the most data
Go to Settings > Cellular and you can see how much data you’ve used in the current billing period and below that you’ll see a list of your apps. Under each app’s name is the amount of data it has used for the current billing period. You can toggle off any app that you think is eating more than its fair share.
4. Disable Wi-Fi Assist, This may be eating more cellular data than you would like
Wi-Fi Assist is a great feature where your iPhone hands off a weak Wi-Fi signal to your cellular network to prevent pages from loading slowly (or not at all) as it clings to the last remnants of a Wi-Fi signal. If you sit on the edge of a Wi-Fi network at work, say, then your cellular network may be assisting more than you’d like and running up data charges.
5. Download music, don’t stream
Streaming music or podcasts for long stretches when you are away from Wi-Fi can quickly add to your data usage. Most music and podcast apps (like Spotify, and Apple Music) let you restrict streaming to Wi-Fi only, which will then force you into the habit of downloading playlists or podcasts before playing them instead of streaming them over cellular data. Let’s look at Apple Music and Apple’s Podcasts apps as examples.
For Apple Music, go to Settings > Music. In the Streaming & Downloads section, you’ll see two settings if the first one is enabled. The first, Use Cellular Data, lets you disable streaming via a cellular connection entirely. If that’s too drastic a measure for you, then you can leave that setting enabled and turn off High Quality on Cellular to stream songs at a lower bitrate when you aren’t on Wi-Fi.
For the Podcasts app, go to Settings > Podcasts and turn off Cellular Data. You can also enable “Only -Download on Wi-Fi” to prevent podcast downloads from adding to your data usage.
6. Fetch mail less frequently
Check to see how frequently your email account is set to fetch new mail — the less frequently it fetches mail, the less data (and battery) you’ll use. Go to Settings > Mail > Accounts > Fetch New Data. First, make sure Push is turned off if you want to save data and don’t need new emails pushed to you constantly. Next, see what the schedule is for Fetch at the bottom of the screen. If you choose manually, then the Mail app will check for new email only when you open the app. Changing your Fetch schedule will not only save data, it may also save your phone’s battery life.
7. Use Safari’s Reading List
You can queue up articles while you’re using Wi-Fi to read later when you’re on a cellular connection or out of range completely. When you add a page to Safari’s Reading List, Safari downloads it for offline viewing. To add an article to the Reading List, tap the Share button at the center of the bottom navigation bar and then tap Add to Reading List. If you use iCloud, then it will share your Reading List with your other iOS devices, but you can stop it from sharing via a cellular connection by going to Settings > Safari and scrolling down to the bottom and toggling off Use Cellular Data for the Reading List feature.
Let me add an eight way to save data – become really familiar with the services offered (free) by Facebook, Google and other up-starters in the tech industry. They own apps like Messenger, Imo, WhatsApp, etc. that can help save on your phone bill. Also, note that most at home internet/cable providers i.e. Verizon and Xfinity now offer hotspots with free unlimited connections to their customers at locations away from home.

Converting your Old BOSE Sounddock (or any 30 Pin) Player to Bluetooth

Three or four years ago one of the hottest portable audio items one could have was the BOSE SoundDock Portable Digital Music Player – Series III. It has a docking “station” that allow you to load your music library on your IPhone, IPod, IPad or any other music player and take it with you – giving you the ability to have a party anytime or anywhere. Many lovers of great audio still believe that this unit is the best audio play-out unit made to date. This unit was later replaced by the BOSE SoundDock 10 Bluetooth Digital Music unit. Then recently Bose introduced two new versions (but lesser audio quality) of this unit, also with Bluetooth – the SoundLink- Series III and the Sound Touch Series I. This means you no longer needed to attach your player (IPod, IPhone, etc.) to the docking station. Instead, you connect via Bluetooth.
Personally, I have listened to the new units and that experience only made me have more love for my SoundDock Portable Digital Music Player – Series III. Thus I set out to find a way to make my Series III unit Bluetooth compatible. For less than ten dollars ($9.99 at Tuesday Morning) I was able to find an Xtreme 30 Pin Bluetooth Adopter (sells for $21.95 at amazon.com).
xtreme-1
This device turns any unit that can attach to the old 30 Pin IPod/IPhone connection into a Bluetooth link. I also understand that the Samson 30 Pin Bluetooth Receiver (model # SABT30 – sells for $19.99 at amazon.com) also works. Unfortunately, neither of these devices works with newer apple devices with lighting connection. Today I am as happy with my SoundDock Portable Digital Music Player – Series III as the first day I bought it. It is still the first thing that goes into my carry-on bag whenever I start packing for vacation.

COMING TO A DASHBOARD NEAR YOU: The Connected Car

When you walk into an auto dealer’s showroom in 2017 you will have get use to hearing several new terms and references as applied to your car audio. Among the new terms will be the new word audiotainment.  Audiotainment focuses on making media available, discoverable, and easy to use in vehicles in ways that are consistent with what consumers are doing in other areas of their lives. When you purchase a new car in the fall of 2017, the old model of radio with two knobs, six or twelve presets and a CD player is about to be a relic of the past – replaced by an explosion of audio sources, channels and options. Already some auto dealers are hiring tech-savvy high school seniors (@$11 or $12/hr) to work as apprentices to their sales persons – just to explain the dashboard to buyers. The new dashboard will perform most of the tasks that can be done on a smart phone.
The device will allow for personalize interactions with the driver. This may include geo-targeting, instantaneous driver response and user-control time-shifting of content. The technology will enable location-based advertising, on-demand traffic and weather, on-demand digital streaming, provide opportunities for song rating, tagging and on-spot voting in addition to  immediate response to coupon offering.
The new technology (via WIFI, 4G or LTE) will also enable broadcasters to leverage data from driver interaction with social and digital media while on the move. Thus completely transforming the way radio sales people sell drive-time audience to advertisers. In essence, what we have is a fully connected dashboard computer that transforms new cars into a mobile commercial and content platform. This essentially gives the potential advertisers (or underwriters – in the case of public media) access to driving and listening data, while simultaneously providing insurance companies with access to motor vehicle data such as instantaneous speed. This will certainly impact the traditional advertising model which is currently based mostly on ratings and reach data – providing options for direct-to-consumer offerings.
Introduction to this technology dates back as far as 2007 when Ford Motors introduced SYNC in some of their high-end vehicles. This technology allowed the driver to use voice control for telephone calls and music access. It also introduced us to the SYNC AppLink. Today this technology has been integrated with that of smart-phones which together forms the backbone for Connected Vehicle.
connected-car-dashboard
AppLink include applications (apps) that provide AAA member services, expenses report tracking and the ability to search for local entertainment. When SYNC is integrated with Apple’s CarPlay or Google’s Android Auto, drivers have access to maps, messaging, phone, music, smart option to lock/unlocked doors and the ability to check fuel level form both dashboard and smart devices.
Ford’s latest version of SYNC is Sync 3 and they expect it to be integrated with either CarPlay or Android Auto in most of their 2017 auto models – starting with the Ford Escape. They project that 43 million vehicles will be equipped with this technology by 2020.
In addition to the technologies described above, recently an electronic firm – Nav Tool, based in New York announced that they have developed an interface that enable Smartphone mirroring for older automobiles with navigation screen. Go to navetool.com for details.
The major players in this new arena (developers of the operating system) are the same companies that created the platforms for our cell phones – Google (android auto systems) and Apple (CarPlay). Linux provides the operating system for the new Tesla Model S – an electric car and are in negations to do the same for some European models. This has caused some level of discomfort among some radio stations owners and radio networks operators, because in addition to owning the technology, Google and Apple are also expanding their offerings in the content business. However, others (myself included) believe irrespective of who owns the platforms, channels or operating system, consumers will have more choices and they have always chosen the content that they can use and that are most relevant to their day-to-lives.
In all of history there has always been trepidation regarding introduction of new technology. The Connected Vehicle is just the latest – so let’s bring on the technology, make it easy to use and may the best content win.